Kit Watt Solar

1 Kw (1008 WATTS) 7 Solar Cells Panel KIT or 1/2 Kw (576 watts) 4 panel kit

1 Kw (1008 WATTS) 7 Solar Cells Panel KIT or 1/2 Kw (576 watts) 4 panel kit

1 Kw (1008 WATTS) 7 Solar Cells Panel KIT or 1/2 Kw (576 watts) 4 panel kit

Sells many items needed to build your own solar panels, solar cells, junction boxes, tabbing wire, buss wire, solder, soldering irons, EVA encapsulation, rosin flux pens, MC-4 connectors, and more. Visit my store for a complete list. Not sure what you need send me a question and some details. This listing is for a 1Kw (1008) watt 7 panel kit OR a 1/2 Kw (576) watt 4 panel kit.

The description of each choice is below. 1 Kw (1008) watts 7 panels kit. 260- 6x6 multi-crystalline solar cells , Enough to make 7-36 cell panels , + 8 spare cells.

5 volts x 8 amps each(4 watts per cell) , 36 cells will make a 144 watt panel. (7 x 144 W=1008 W) Cells rated using STC(standard test conditions) Google it.

New 2BB (two buss bars) Motech or E-TON solar cells. A-GRADE solar cells, panel producers use only A-GRADE cells. Still in the original boxes and cases.

520 FEET TABBING WIRE (158 M). 70 FEET BUSS WIRE (21 M). 176 mm thick x 1.5 mm wide buss wire. THIS IS 5 MM WIDE BUSS SOLDER COATING THICKNESS IS 400-700 MICROINCHES/SIDE.

MG-CHEMICAL BRAND ROSIN FLUX PEN NON-CORROSIVE RA TYPE FLUX NON-CONDUCTIVE NO REMOVAL OF RESIDUES NECESSARY 10 ML CONTENTS PER PEN. 7-WATERPROOF JUNCTION BOX WITH 10 AMP DIODE.

USED BY SOLAR PANEL MANUFACTURES WORLDWIDE. A VARIETY OF DIFFERENT SIZE WIRE CAN BE USED, THE CAP WILL TIGHTEN DOWN TO ACCEPT EVEN SMALL WIRES, IT IS REALLY QUITE CLEVER HOW 12 SMALL FINGERS OF PLASTIC TIGHTEN AROUND THE GASKET. THE COVER HAS A GASKET (O-RING TYPE) GLUED INTO A GROOVE ON THE LID TO KEEP IT IN PLACE WHILE SHUTTING THE LID , IT WILL NOT BIND UP AND CAUSE THE BOX TO LEAK.

NEW SNAP SHUT DOOR IS EASY TO USE, KEEPING YOUR CONNECTIONS SECURELY IN PLACE. TO ACCESS THE JUNCTION BOX LATER ALL YOU NEED IS A SCREW DRIVER. LEFT SIDE FOR YOUR (-) NEGATIVE RIGHT SIDE FOR YOUR (+)POSITIVE. FYI the silver stripe on the diode is always near the + side.

2-TUBES SOLDER in a handy dispenser pack. 9' 2 (280 cm) length per tube. 1/2 Kw (576) watts 4 panel kit.

150- 6x6 multi-crystalline solar cells , Enough to make 4-36 cell panels , + 6 spare cells. (4 x 144 W= 576 W) Cells rated using STC(standard test conditions) Google it. 300 FEET TABBING WIRE (90 M). 40 FEET BUSS WIRE (12 M).

4-WATERPROOF JUNCTION BOX WITH 10 AMP DIODE. 1-TUBE SOLDER in a handy dispenser pack. 9' 2 (280 cm) length. The schematic was original used for 3"x 6" solar cells but will apply to 6" x 6" as well.

The item "1 Kw (1008 WATTS) 7 Solar Cells Panel KIT or 1/2 Kw (576 watts) 4 panel kit" is in sale since Saturday, January 28, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "heartofthesun-fo" and is located in Springfield, Pennsylvania. This item can be shipped worldwide.

  • Modified Item: No
  • Custom Bundle: No
  • Wattage: 1000 WATTS OR 500 PLUS WATTS
  • Type: Solar Cell/DIY
  • MPN: Does Not Apply
  • Brand: HEART OF THE SUN-SOLAR
  • Non-Domestic Product: No
  • Application: Home/Garden


1 Kw (1008 WATTS) 7 Solar Cells Panel KIT or 1/2 Kw (576 watts) 4 panel kit