Renogy 400W Solar Panel Starter Kit W/ 30A PWM LCD Charge Controller. EL tested solar modules; no hot-spot heating guaranteed. Authorized UL 1703 photovoltaic modules and panels. Excellent performance in low light environments. Ideal output: 500Wh per day; can fully charge a 50Ah battery from 50% in 3 hours (depending on the availability of sunlight).
Renogy Solar Panel Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary to charge your battery with solar energy: four 100W 12V Mono Solar Panels, one Charge Controller, a pair of 20ft 10AWG MC4 Adaptor Kit (to connect the solar panel and charge controller), a pair of 8ft 10AWG Tray Cable (to connect the charge controller and battery), and four sets of Mounting Z-brackets, and three pairs of Y branch MC4 Connectors if you choose a kit with PWM controllers. Four 100W 12V Mono Solar Panels.
One PWM Solar Charge Controller. 1 pair of 20ft 10 awg adaptor kit (panel&controller connectors). 1 pair of 8ft 10 awg tray cables (controller&battery connectors). Four sets of Z Brackets (set of 4). Three pairs of MC4 Y Branch connectors.
We offer residential and commercial solar kits that include all of the necessary system components that you'll need for your setup, from charge controllers to inverters, railings to cables, and more. These kits are suitable for both on-grid and off-grid applications, allowing you the flexibility to pick the system which best fits your needs.
Off-Grid Rooftop / Ground Mounted. Residential / Commerciatial / Power Station.
RVs, trailers, motorhomes, caravans, boats, etc. Renogy 100 Watt 12 Volt Mono Solar Panel(Compact Design). IP65 Rated waterproof junction box.
IP67 Rated waterproof MC4 connectors. Maximum System Voltage: 600V DC (UL).
Optimum Operating Voltage (Vmp): 17.9V. Open-Circuit Voltage (Voc): 21.6V. Optimum Operating Current (Imp): 5.72A. Short-Circuit Current (Isc): 6.24A.
Dimensions: 42.2 X 19.6 X 1.38 In. The Renogy Wanderer Li 30A Negative PWM Charge Controller. PV Input Voltage: 25 VDC.Working Temperature: -20°F - 113°F. Max Gauge Size: Up to 8AWG. Storage Temperature: -31°F - 176°F. Dimensions: 6.45 x 4.31 x 1.76 inches. Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers.
Temperature: -40 F 194 F. Normal Cross Sectional Area of the Conductor (mm2): 6.0. Diameter of Wires in Conductor (mm): 3.02±0.08. Wall Thickness of Insulation (mm): 0.85.
Wall Thickness of Sheath (mm): 1.08. Number of Wires in Conductor: 84. Renogy Solar Panel Mounting Z Brackets (Set of 4). Four Z Shape Solar Panel Brackets.
Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair). Renogy Solar Panel MC4 Branch Connectors (Pair).
Withstanding voltage: 1000V DC(TUV), 600V(UL). Contact Material: Copper, Silver Plated. Flame Class: UL94-V0 or UL94-5VA. Renogy was founded on the strong belief that solar power should be available to everyone, anywhere on the planet. Thus we strive to offer clean energy for every application and will customize according to different needs.
We use top quality solar cells and superior accessories to produce high performance solar modules that maximize the energy yield of the solar system per unit area, thereby reducing the system cost per watt for you. Glass: 3.2mm tempered glass, excellent mechanical loading performance, resists 5400PA snow loads and 2400PA wind load. EVA Film: main component is 30%-33% of EVA, which assures a high transmission, strong adhesion and long term performance.
Cell: excellent performance in low light environment and high conversion efficiency guaranteed. Frame: strong corrosion resistant aluminum frames. Backsheet: both sides of backsheet are coated with fluoro resin to prevent aging.This unique structure allows our backsheet to provide perfect adhesion with EVA and junction box. QUALITY ASSURANCE Industry-leading Testing Approved (Under UL1703, IEC 61215, IEC 61730 Standards). Thermal/Freezing and High Humidity Cycling Test. Mechanical, Wind and Twist Loading Test. Please note that we won't be able to process any order with PO Box address for any size of solar panel. Anything outside of this policy requires special authorization. Other Items You Might Be Interested In. Deep Cycle LFP Battery with BMS.
200W Solar Panel BR Kit. The item "Renogy 400W Watt Mono Solar Panel Starter Kit 30A LCD Battery Charge Controller" is in sale since Tuesday, October 29, 2019. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "renogy_solar" and is located in Ontario, California.
This item can be shipped to United States.